Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lambda Sensor in the Suzuki Jimny?

Model: Suzuki Jimny Jb43, Jb53, Jb33, Jb23 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Oxygen sensor

See other generations:
Video tutorial

To replace the lambda sensor in the Suzuki Jimny, open the bonnet to access the engine bay: here you will locate the lambda sensor on the right side of the engine block, just below the exhaust manifold. Disconnect the device to free it from its power cable; once the old sensor has been removed, insert the new one into its place, securing it properly and ensuring everything functions correctly.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

Replacing the Lambda Sensor on a Suzuki Jimny
Replacing the Lambda Sensor on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) This guide outlines the procedure to remove and replace the lambda sensor on a Suzuki Jimny in simple and quick steps. First, open the bonnet of your…
How to Replace the Auxiliary Belt on a Suzuki Jimny
How to Replace the Auxiliary Belt on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) Before you can start, open the bonnet of your Suzuki Jimny. Begin by loosening the tensioner by slightly unscrewing the fixing bolt. This will free t…
How to Fit Roof Bars on a Suzuki Jimny
How to Fit Roof Bars on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) Before you can begin, you need to exit the cabin of your Suzuki Jimny. Start by removing the plastic inserts located at the upper corners of the roof…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos