Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Seats from Suzuki Jimny

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Seat

To remove the rear seat cushion, pull upwards with force while shaking the cushion slightly. It is a single cushion, not two or three separate ones, so pull it first from one side and then from the other to remove it. Now remove the internal plastic cover, as shown in the video. Then repeat the process with the same plastic on the boot side. Using a 14mm socket, unscrew the bolts that secure the rear seat brackets, then those on the sides under the carpet. Remove the seats from the boot, so clear it of all items before proceeding with the removal.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Seats from Suzuki Jimny
Removing Rear Seats from Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Today, you will see the main steps to remove the rear seats from a Suzuki Jimny. First, open the tailgate and grab a crosshead screwdriver to unscrew…
How to transform the Suzuki Jimny into a bed
How to transform the Suzuki Jimny into a bed
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) Well yes, you read that right, as stated in the title it is possible to transform the Suzuki Jimny into a bed. To carry out this operation, it is nec…
How to remove the partition grid of the Suzuki New Jimny
How to remove the partition grid of the Suzuki New Jimny
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) To remove the partition grille of the Suzuki Jimny, we need to open the trunk and the front doors of the vehicle. Immediately after, we recline both …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos