Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Cruisym 300
Part: Battery

To replace the battery on the Sym Cruisym 300, loosen the screws securing the panel located at the bottom left of the steering wheel. Once these screws are removed, you can detach the panel and access the battery underneath. The battery must be freed from its securing screws and disconnected from the power cables. You can then insert a new battery into its slot, connecting it to the cables and securing it with the appropriate bolts. After installation, cover everything with the panel.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on the Sym CruiSym 300
How to Replace the Spark Plug on the Sym CruiSym 300
Cruisym 300 In this short and simple guide, you will learn how to remove and replace the engine spark plug on the Sym CruiSym 300, following the instructions bel…
How to Reset the "Service" Light on a Sym CruiSym
How to Reset the "Service" Light on a Sym CruiSym
Cruisym 300 Before you start, sit on the seat of your Sym CruiSym. Begin by turning on the ignition by turning the key in the ignition switch. Then, repeatedly p…
How to perform a service on the Sym CruiSym 300
How to perform a service on the Sym CruiSym 300
Cruisym 300 The following steps will guide you through performing the routine maintenance service, replacing the engine oil, oil filter, and air filter on the Sy…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos