Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust of the TM Racing 125, you need to loosen the screws that secure the side panel of the rear fender: once this panel is removed, you can unscrew the screws that hold the exhaust supports and also widen the connecting clamp between the end cap and the collector. Once the old exhaust is freed, it can be completely removed from its seat so that the new one can be inserted: this must be properly secured and covered by the appropriate panel.

Posted on 18 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on TM Racing 125?
How to Replace the Exhaust on TM Racing 125?
Tm Racing 125 The procedure for replacing the exhaust installed on the TM Racing 125 involves loosening the screws that secure the exhaust end can to its housing, …
How to Remove the Exhaust End Can from a TM Racing 125
How to Remove the Exhaust End Can from a TM Racing 125
Tm Racing 125 Before you begin, it is advisable to place your TM Racing 125 on a centre stand to position it vertically. This operation should be performed with th…
How to Change the Piston of a TM Racing 125
How to Change the Piston of a TM Racing 125
Tm Racing 125 To remove the piston of a TM Racing 125, first remove the seat and the side panels. Next, you will need to remove the bolts securing the exhaust and …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos