Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Calya
  6. : Drive shaft boot

Toyota Calya - Drive shaft boot

Toyota Calya (2016-2023 / MK 1)
How do you replace the drive shaft boot on the Toyota Calya?

In order to replace the drive shaft cap of the Toyota Calya, you need to go and lift the car in order to unscrew the bolts that fix the corresponding wheel. …read all…
Posted on 29 April 2023 by ScegliAuto
Toyota Calya (2016-2023 / MK 1)
How to replace the Toyota Calya drive shaft boot?

The replacement of the Toyota Calya drive shaft boot is done by lifting the car with a jack or a bridge, so that the bolts that secure the front wheel can be …read all…
Posted on 24 June 2022 by ScegliAuto

Shock absorbers (1) Air conditioning (1) Car stereo (1) Battery (2) Key (3) Dashboard (1) Drive shaft boot (2) Particulate filter (1) Air filter (2) Cabin air filter (4) Clutch (1) Engine oil (1) Front bumper (1) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos