Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Calya
    4. : Cabin air filter

Toyota Calya - Cabin air filter

Toyota Calya (2016-2023 / MK 1)
How to replace the cabin air filter on Toyota Calya
If we need to replace the cabin air filter on this car, we can follow the general indications on how to behave in this description and we can also refer to the …read all…
Posted on 29 April 2023 by ScegliAuto
Toyota Calya (2016-2023 / MK 1)
How to change the air conditioning filter on Toyota Sigra / Calya
How to change the air conditioning filter on Toyota Sigra / Calya. The compartment where the air conditioning filter is kept is located behind the glovebox, …read all…
Posted on 21 August 2022 by ScegliAuto
Toyota Calya (2016-2023 / MK 1)
How to replace the cabin filter in Toyota Calya?
In this tutorial we can see how to replace the cabin filter in Toyota Calya, an extremely simple and fast operation. First of all, position ourselves on the …read all…
Posted on 17 November 2022 by ScegliAuto
Toyota Calya (2016-2023 / MK 1)
How to replace the cabin filter in Toyota Calya?
In this tutorial we can see how to replace the cabin air filter in the Toyota Calya, an extremely simple and fast operation. First of all, let's go to the …read all…
Posted on 21 May 2022 by ScegliAuto
Shock absorbers (1) Air conditioning (1) Car stereo (1) Battery (2) Key (3) Dashboard (1) Drive shaft boot (2) Particulate filter (1) Air filter (2) Cabin air filter (4) Clutch (1) Engine oil (1) Front bumper (1) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos