Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Estima Tarago
    4. : 2000-2006 (Xr30, Xr40)

Toyota Estima Tarago Years 2000-2006 (Xr30, Xr40)

Toyota Estima Tarago (2000-2006 / Xr30, Xr40)
How do you replace the front headlight bulb of the Toyota Estima?
In order to replace the front headlight bulb of the Toyota Estima, you need to lift the car with a jack and loosen the bolts that secure the corresponding …read all…
Posted on 2 July 2023 by ScegliAuto
Toyota Estima Tarago (2000-2006 / Xr30, Xr40)
Where is the fuse box on the Toyota Estima Tarago 2005
If you still don't know where the fuse box of your 2005 Toyota Estima Tarago is located, then you can't help but read the following guide carefully. Before …read all…
Posted on 7 May 2023 by ScegliAuto
Toyota Estima Tarago (2000-2006 / Xr30, Xr40)
How to replace the Toyota Estima Tarago engine mount
Let's see in this guide how to disassemble and replace the Toyota Estima Tarago engine mount. First of all we open the bonnet of our car and begin to unscrew …read all…
Posted on 7 September 2022 by ScegliAuto
Toyota Estima Tarago (2000-2006 / Xr30, Xr40)
How to replace the cabin filter in the Toyota Estima?
Replacing the cabin filter in the Toyota Estima, as we can see in this tutorial, is a very simple and quick operation. First of all let's position ourselves on …read all…
Posted on 24 July 2022 by ScegliAuto
Toyota Estima Tarago (2000-2006 / Xr30, Xr40)
How to replace the V-belt of the Toyota Estima Tarago?
In order to replace the V-belt of the Toyota Estima Tarago it will be possible to go and open the hood, so that you have access to the components inside the …read all…
Posted on 20 June 2022 by ScegliAuto
Toyota Estima Tarago (2000-2006 / Xr30, Xr40)
How to replace the headlight of the Toyota Estima Tarago?
In order to replace the front headlight of the Toyota Estima Tarago you need to open the hood, so that you can access the screws that secure the bumper from …read all…
Posted on 29 April 2024 by ScegliAuto
Key (3) V-belt (1) Headlight (1) Air filter (1) Cabin air filter (2) Headlight bulb (1) Door (1) Fuse box (2) Seat (1) Engine mount (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos