Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Toyota Estima Tarago

Model: Toyota Estima Tarago Xr30, Xr40 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: V-belt

See other generations:
Video tutorial

To replace the serpentine belt on a Toyota Estima Tarago, open the hood to access the components inside the engine compartment. On the left side of the engine block, locate the serpentine belt running around the pulleys.

By removing the central bolts, you can take off the pulleys and consequently the belt, allowing you to replace it with a new part. After the replacement, reinstall the pulleys and close the hood of the vehicle.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Mount of the Toyota Estima Tarago
How to Replace the Engine Mount of the Toyota Estima Tarago
Toyota Estima Tarago (2000-2006 / Xr30, Xr40) In this guide, let's see how to remove and replace the engine mount of the Toyota Estima Tarago. First, open the hood of your vehicle and start unscr…
How to Replace the Front Headlight on a Toyota Estima Tarago?
How to Replace the Front Headlight on a Toyota Estima Tarago?
Toyota Estima Tarago (2000-2006 / Xr30, Xr40) To replace the front headlight on a Toyota Estima Tarago, open the hood to access the screws that secure the bumper from the top. Next, loosen the sc…
Where to Find the Fuse Box of the 2005 Toyota Estima Tarago
Where to Find the Fuse Box of the 2005 Toyota Estima Tarago
Toyota Estima Tarago (2000-2006 / Xr30, Xr40) If you don't yet know where the fuse box is located in your 2005 Toyota Estima Tarago, then you need to read this guide carefully. Before proceeding,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos