Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Toyota HiLux -

Toyota HiLux (2015-2024 / an 130, an 120, mk 8)

Toyota HiLux (2015-2024 / An130, An120, MK 8)
How to deactivate the TPMS light on the Toyota Hilux.
In this guide, we will go over the main instructions that will allow us to reset the tire pressure warning light on the Toyota Hilux. Before performing the …Read all…
Posted on 7 January 2026 by ScegliAuto
Toyota HiLux (2015-2024 / An130, An120, MK 8)
How do you reset the tire pressure light on the Toyota Hilux?
It will be possible to make the tire pressure warning light disappear from the Toyota Hilux instrument panel by resetting it by inflating the tires until they …Read all…
Posted on 7 May 2025 by ScegliAuto
Toyota HiLux (2015-2024 / An130, An120, MK 8)
How do you reset the tire pressure warning light on the Toyota Hilux?
To reset the tire pressure warning light of the Toyota Hilux, you need to inflate the tires until they reach the recommended pressure value: this value will be …Read all…
Posted on 22 January 2025 by ScegliAuto
Shocks (1) Battery (3) Transmission (1) Body (1) Key (15) Timing belt (3) Onboard computer (2) Checks and maintenance (12) Dashboard (1) Rear bench seat (1) Headlight (1) Tail light (3) Cabin air filter (4) Fuel filter (1) Diesel fuel filter (5) Fuel injectors (2) Headlight bulb (4) Tail light bulb (2) Clock (2) Brake pads (2) Shift knob (1) Heater core (1) Wheel (3) Fuse box (44) Seat (2) AdBlue warning light (8) Warning light – error code (13) (3) Tire pressure warning light (2) Service warning light (40) Fuel cap (1) Windshield wipers (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos