Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on a 2009 Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Service warning light

To reset the service light related to the service maintenance by yourself, you will need to keep the car's instrument panel off and press the button on the right side of the display while simultaneously turning on the instrument panel. By performing this operation, the service light will turn off and the display will show the next kilometers until the next service maintenance. If the light does not turn off, it may be necessary to go to the workshop to perform a computerized diagnosis to search for and resolve the problem that may be related to the vehicle's control unit.

Posted on 19 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2020-2026 / MK 4) Good morning, today we will focus on the procedure to reset the "Service" light of our Toyota Yaris. Before proceeding, it is essential to make sure …
Toyota Yaris (2005-2011 / Xp90) When your Toyota Yaris requests a service, such as an oil change and filter replacement, it is essential for the proper maintenance of the vehicle, e…
Toyota Yaris (2020-2026 / MK 4) After completing all the service operations, you can proceed to reset the service light on a Toyota Yaris Hybrid. The steps are simple and straightfo…

    Frequently Asked Questions

    • Yaris 2005-2011 - What does the oil warning light on the Toyota Yaris indicate? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos