Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light of the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Service warning light

The Service light that appears on the Toyota Yaris instrument panel can be reset by keeping the instrument panel off and then pressing the button located on the side of the instrument panel. While holding down this button, you will need to turn on the instrument panel by turning the ignition key: it will then be necessary to keep the button on the display pressed until the Service light and the remaining kilometers until the next service are reset. Once the operation is complete, you can turn off and on the instrument panel to verify that the reset is complete.

Posted on 22 April 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Toyota Yaris (2020-2026 / MK 4) You can completely eliminate the Service light from the instrument panel of the Toyota Yaris by holding down the button located on the right side of …
Toyota Yaris (2020-2026 / MK 4) To reset the Service light of the Toyota Yaris, you need to press and hold the button located on the right side of the dashboard until it turns off: …
Toyota Yaris (2020-2026 / MK 4) To reset the Service light on the Toyota Yaris Hybrid, turn the ignition key to the 'on' position to access the menu that will appear on the instrume…

    Frequently Asked Questions

    • Yaris 2005-2011 - What does the oil warning light on the Toyota Yaris indicate? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos