Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front wipers of the Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

These short and simple instructions will show us how to disassemble and replace the front wipers of the Toyota Yaris. First, let's move to the front of the vehicle and start by lifting the arm of the front wiper; then let's unhook the plastic clip of the wiper and rotate it, in order to unhook and remove it, as shown in the video.

At this point, let's properly install and secure the wiper on the arm, gently lowering it onto the windshield, replacing the other front wiper in the same way!


Posted on 25 June 2025 by ScegliAuto


Related tutorials

Replacement of the front windshield wipers of the Toyota Yaris
Replacement of the front windshield wipers of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In this guide we will see the instructions for disassembling and replacing the front wipers of the Toyota Yaris. First of all, let's move to the fron…
How to Change the Front Wipers on a Toyota Yaris
How to Change the Front Wipers on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) The following steps will show you how to remove and replace the front wipers on a Toyota Yaris in brief and simple moves. First, move to the front of…
Where are the fuses located in the Toyota Yaris?
Where are the fuses located in the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) On board the Toyota Yaris, the fuses are located in the appropriate boxes that are installed on the vehicle: in this type of vehicle it will be possi…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos