Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Fuses on a Toyota Rav 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Fuse box

If any electrical device does not operate, it’s possible that the corresponding protection fuse has blown: the fuse box for this model is located in the engine compartment, and there are actually two, each positioned near the strut towers. Once you remove the cover of the fuse box, the legend indicating the corresponding fuses is underneath, along with a pair of tweezers that make it easier to remove and insert the fuse for checking and replacing if necessary; spare fuses can also be found under the SPARE section. When replacing, it’s important not to change the amperage of the fuse.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses in the Toyota Rav 4?
Where Are the Fuses in the Toyota Rav 4?
Toyota Rav 4 (1994-2000 / MK 1, Xa10) In the Toyota Rav 4, there are two fuse boxes containing all the fuses in the vehicle. The first is located inside the cabin, at the lower left part …
Where Are the Fuses Located on the Toyota RAV 4?
Where Are the Fuses Located on the Toyota RAV 4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) On the Toyota RAV 4, all fuses are located within the designated fuse boxes inside the vehicle: this type of car has three boxes. The first is locate…
Where to Find the Fuses on a Toyota RAV4
Where to Find the Fuses on a Toyota RAV4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) On the Toyota RAV4, all the fuses are located within the designated fuse boxes present in the vehicle: in this model, you can find two boxes containi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos