Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Fuse Boxes in the Engine Bay of the Toyota RAV 4

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Fuse box

The information in this guide will show you how to access the fuse boxes in the engine bay of the Toyota RAV 4. First, open the car's bonnet and start removing the plastic cover found at the top right, thus accessing the main fuses and relays of the vehicle; a second fuse box is located on the left, removing the cover in the same way, as illustrated in the video. Usually, you will find the fuse diagram inside the covers, also available in the vehicle's user and maintenance manual.

Posted on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses Located on the Toyota RAV 4?
Where Are the Fuses Located on the Toyota RAV 4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) On the Toyota RAV 4, all fuses are located within the designated fuse boxes inside the vehicle: this type of car has three boxes. The first is locate…
Where are the fuses located in the Toyota RAV 4?
Where are the fuses located in the Toyota RAV 4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) The fuses in the Toyota RAV 4 are located inside the designated fuse boxes within the vehicle: this model has three boxes. The first is situated insi…
Where to Find the Fuses on the Toyota RAV4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In the Toyota RAV4, the fuses are located within dedicated fuse boxes installed in the vehicle: this model has two boxes for this purpose. The first …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos