Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the TPMS Light on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part:

Briefly, you will learn the steps to reset the tyre pressure warning light on a Toyota Yaris; before resetting the TPMS sensors, ensure all four tyres are at the correct operating pressure. Then, get inside the vehicle and start by turning on the ignition; next, open the glove compartment and press and hold the TPMS reset button located inside for about three seconds, as illustrated in the video. Finally, check that the tyre pressure warning light has been reset on the instrument panel!

Posted on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the TPMS Light on the Toyota Yaris
Resetting the TPMS Light on the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) Today's guide will illustrate the steps to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris; before performing the reset, e…
Resetting the tire pressure warning of the Toyota Yaris
Resetting the tire pressure warning of the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) Following the instructions in this guide, we will see how to reset the tire pressure warning of the Toyota Yaris; before resetting the TPMS sensors, …
Resetting the tire pressure warning (TPMS) of the Toyota Yaris.
Resetting the tire pressure warning (TPMS) of the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) Shortly, we will see how to reset the tire pressure warning light of the Toyota Yaris; before resetting the TPMS sensors, it is necessary that all fo…

    Frequently Asked Questions

    • Yaris 2020-2027 - What to do in case of tire warning light on Toyota Yaris? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos