Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light (TPMS) on the Toyota RAV 4

Model: Toyota Rav 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

Today we will discover the steps that will allow us to reset the tyre pressure warning light on the Toyota RAV 4; before recalibrating the TPMS sensors, it is necessary that all four tyres are at the correct operating pressure. Then, get into the vehicle and start the ignition; using the appropriate programming tool, you will program the new or current TPMS sensors, updating the operating pressures accordingly.

Finally, check the reset of the tyre pressure warning light on the instrument panel!


Posted on 28 October 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure light on the Toyota RAV 4
How to reset the tire pressure light on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Today's step-by-step instructions will show us how to reset the tire pressure monitoring system (TPMS) light on a Toyota RAV 4; before proceeding wit…
How to Reset the Tyre Pressure Warning Light on the Toyota RAV4
How to Reset the Tyre Pressure Warning Light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Today, in this brief and simple guide, you will see the steps to reset the tyre pressure warning light (TPMS) on the Toyota RAV4; before performing t…
How to Reset the Tyre Pressure Light on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The illumination of the tyre pressure light indicates a possible puncture or loss of pressure; let's see how to reset the TPMS light on the Toyota RA…

How to reset the brake wear warning light on the Ford Transit?

To reset the brake wear warning light on the Ford Transit, first replace the worn brake pads with new replacement parts. Once the replacement is complete, disconnect the wear sensor connectors to allow them to reset. Then reconnect all the connectors to ensure they can read the new wear values. Therefore, enter the cabin and turn on the instrument panel to verify that the brake pad wear warning light has been reset.

Watch the video!


by ScegliAuto

More videos