Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Windshield wipers

See other generations:
Video tutorial

Replacing the rear wiper blade on your vehicle is quite simple. Follow these steps: lift the wiper away from the rear screen.

If you only want to replace the blade, rotate it 90 degrees from the arm and pull it towards you to detach it. Then, fit the new blade by positioning it at 90 degrees to the arm and applying slight pressure. If you also want to replace the arm, remove the plastic cover at the base of the wiper by pulling it towards you. At this point, using a socket spanner, you can unscrew the fixing bolt of the wiper arm.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Blade on a 2017 Toyota Yaris
How to Replace the Rear Wiper Blade on a 2017 Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) If you own a 2017 Toyota Yaris and want to learn how to correctly replace the rear wiper blade, follow the steps outlined in this guide. First, park …
How to Change the Rear Wiper on a Toyota Yaris 3
How to Change the Rear Wiper on a Toyota Yaris 3
Toyota Yaris (2011-2019 / Xp130) In this short video tutorial, you will see how to quickly remove and replace the rear wiper or rear screen wiper on the third generation Toyota Yaris…
How to Replace the Rear Wiper on the Toyota Yaris
How to Replace the Rear Wiper on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Replacing the rear wiper on the Toyota Yaris is a straightforward and quick task. First, ensure the wiper is in the resting position, then unclip the…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos