Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuses in a Toyota RAV4?

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Fuse box

To replace the fuses in a Toyota RAV4, first locate the appropriate fuse boxes installed in the vehicle: in this model, there are two fuse boxes. The first is located on the right side of the engine compartment, while the second is situated at the bottom left of the steering column. To replace the fuse in question, use a special pair of tweezers to extract the fuse and replace it with one of the same amperage. The position and function of each fuse are indicated in the vehicle's user and maintenance manual.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses in the Toyota Rav 4?
Where Are the Fuses in the Toyota Rav 4?
Toyota Rav 4 (1994-2000 / MK 1, Xa10) In the Toyota Rav 4, there are two fuse boxes containing all the fuses in the vehicle. The first is located inside the cabin, at the lower left part …
Where to Find the Fuses on a Toyota RAV4
Where to Find the Fuses on a Toyota RAV4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) On the Toyota RAV4, all the fuses are located within the designated fuse boxes present in the vehicle: in this model, you can find two boxes containi…
Where are the fuses located in the Toyota RAV 4?
Where are the fuses located in the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Any fuse present in the Toyota RAV 4 is located either inside one of the appropriate fuse boxes that are installed on the vehicle: in this type of ca…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos