Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Toyota Yaris Sedan - Body

Body Toyota Yaris Sedan (2013-2020 / xp 150)

Toyota Yaris Sedan (2013-2020 / Xp150)
Aesthetic Upgrades for the Toyota Yaris Sedan
Here are some aesthetic upgrades for the Toyota Yaris Sedan that can be done easily and at low cost (the 4,000 rupees mentioned in the video is about $50, and …Read all…
Posted on 17 August 2026 by ScegliAuto
Toyota Yaris Sedan (2005-2013 / Xp90)
How to Replace the Drip Molding on the Toyota Yaris Sedan
To replace the rubber molding of the drip rail on the roof of the vehicle, follow these instructions and refer to the video. Over the years, weather …Read all…
Posted on 15 July 2026 by ScegliAuto

Body Toyota Yaris Sedan (2005-2013 / xp 90)

Toyota Yaris Sedan (2013-2020 / Xp150)
Aesthetic Upgrades for the Toyota Yaris Sedan
Here are some aesthetic upgrades for the Toyota Yaris Sedan that can be done easily and at low cost (the 4,000 rupees mentioned in the video is about $50, and …Read all…
Posted on 17 August 2026 by ScegliAuto
Toyota Yaris Sedan (2005-2013 / Xp90)
How to Replace the Drip Molding on the Toyota Yaris Sedan
To replace the rubber molding of the drip rail on the roof of the vehicle, follow these instructions and refer to the video. Over the years, weather …Read all…
Posted on 15 July 2026 by ScegliAuto
Body (2) Key (1) Bearing (1) Headlight bulb (1) Tail light bulb (1) Antifreeze coolant (1) Clock (1) Fuse box (5) Side mirror (1) (1) Service warning light (1) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos