Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Ligier
    4. : Checks and maintenance

(Various brands) Ligier - Checks and maintenance

(Various brands) Ligier (2013-2020 / )
How to reset the "Service" light on a Ligier JS50
Before we can begin, we will have to go and sit in the driver's seat of our Ligier JS50. So let's start by turning the instrument panel on and off. After that, …read all…
Posted on 8 February 2024 by ScegliAuto
(Various brands) Ligier (2013-2020 / )
Lieger JS service reset
How to reset the maintenance indicator? Let's see how to reset maintenance on Ligier Js car. We enter the Ligier vehicle and check the warning light on the …read all…
Posted on 3 February 2024 by ScegliAuto
(Various brands) Ligier (2013-2020 / )
Ligier JS50 light reset
What to do when the maintenance indicator appears? Let's see how to reset maintenance on a Ligier S50 mini car. We enter the Ligier vehicle and check the …read all…
Posted on 3 February 2024 by ScegliAuto
Battery (2) Checks and maintenance (3) Front bumper (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos