Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
A long time ago, manufacturers used so-called "noisy belts" that alerted the driver to their excessive wear. Unfortunately, modern belts do not emit warnings: for this reason, the maintenance manual indicates their lifespan expressed in miles or years. Establishing general parameters, you can state that the belt should be replaced: Between 62,000 and 112,000 miles travelled. After 5 or 6 years of use. There are many reasons that can lead to a belt wearing out and breaking if it is not subjected to regular checks (approximately every 18,000 miles) and replaced according to the times prescribed by the manufacturer: The presence of foreign bodies that tension it abnormally. Incorrect alignment of the pulleys. Wear of one or both tensioner bearings. Excessive engine temperature. Compromised integrity of the pulleys. Excessive mileage.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

When to Change the Timing Belt or Chain?
When to Change the Timing Belt or Chain?
(Various brands) Various In this guide, you will learn when to replace the timing belt or chain on most vehicles. The timing belt and chain should be checked periodically, pe…
When to Replace the Car Timing Belt
When to Replace the Car Timing Belt
(Various brands) Various In this video, follow practical advice on what to do and when to change the timing belt of your car. The timing belt is a crucial component that tran…
When should the car's timing belt be replaced?
When should the car's timing belt be replaced?
(Various brands) Various The timing belt or timing chain is used to synchronize the pistons with the valve opening, so if the car has a faulty timing belt or chain, the engin…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos