Do it yourself
Frequently asked questions about cars and motorcycles
The tutorial begins with the headlight already removed from the bike. Place the headlight on a workbench. Unscrew the bulb from the bottom and remove it. Before installing the LED bulb, it is advisable to place the sealing rings (they should come with the LED bulb) under the two screws located above the headlight: use a T20 Torx key. Position the circular plate of the LED in place, ensuring the clips align, then insert the rubber O-ring and also fit the lower cover. Finally, you can insert and screw in the LED from the wheel. Check that the light position in the headlight is correct.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video, you will see the correct way to install an H7 LED bulb in the headlamp of any vehicle. First, remove the old bulb by releasing the met…
(Various brands) Various In this short video, we can see the correct way to install an H7 LED bulb: first, we remove the halogen bulb from its housing by rotating it counterc…
(Various brands) Various How to properly install an H4 bulb? We see it in this video. First, remove the two springs that hold the halogen bulb socket in place, which we remov…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos