Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Ducati Supersport 950?

Model: Ducati Supersport 950
Part: Headlight bulb

Video tutorial

To replace the headlight bulb on the Ducati Supersport 950, access the interior of the front end of the bike, located just beneath the handlebars. Here, you will find the internal cover panel of the optical unit, which must be detached to access the bulb.

You can now disconnect the bulb from the appropriate connector and free it from its housing to connect and insert the new bulb. Finally, cover it by reinserting the previously removed panel and check that everything functions correctly.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to replace the battery on the Ducati Supersport 950
How to replace the battery on the Ducati Supersport 950
Supersport 950 Let’s briefly review the steps necessary to remove and replace the battery on the Ducati Supersport 950 motorcycle. First, place the motorcycle on it…
How to Replace the Battery on the Ducati Supersport 950
How to Replace the Battery on the Ducati Supersport 950
Supersport 950 To replace the battery on the Ducati Supersport 950, loosen the screws securing the front panel that also covers the side parts under the fuel tank. …
How to replace the battery of the Ducati Supersport 950?
How to replace the battery of the Ducati Supersport 950?
Supersport 950 To replace the battery of the Ducati Supersport 950, loosen the screws that secure the fairing of the bike, allowing the panel on the left front of t…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos