Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. (Various brands)
  4. :
  5. Various
  6. : How to reset the ECU in the Chevrolet Spin?

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Control unit
Operation: How to reset the ECU in the Chevrolet Spin?

In this tutorial we can see how to reset the Chevrolet Spin ECU, a very simple operation, to be carried out in the event that it presents malfunctions in the engine management. To do this, first of all make sure that the key is not inserted, then open the hood, remove the cover from the fuse box and locate fuse number 18, 10A. Then remove it using the special pliers, turn the panel on and off for at least 3 consecutive times and reinsert the fuse in its housing, obviously always with the vehicle off. We then start the engine and check that the procedure has been successful.


Posted on 31 August 2022 by ScegliAuto



Where is the fuse box of the Chevrolet Spin located?
(Various brands) Various The Chevrolet Spin, produced from 2013 to 2018, has two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind the dr
How to reset the ECU of the Geely Emgrand
(Various brands) Various If the control unit (ECU) of your Geely Emgrand is giving you major operating problems then you must perform a manual reset to resolve any momentary
How to reset the ECU on Chrysler, Dodge, Jeep cars
(Various brands) Various Today we will show you a very simple but clever trick to reset the car ECU at no cost. Turn off the car, pull the handbrake and remove the ignition k

    Frequently Asked Questions

    • Vari - Where is the central locking unit located on Ford cars? Read Answer
    • Vari - Where is the radiator fan fuse located? Read Answer
    • Vari - Why does the dashboard of the Mini Cooper light up but the car doesn't start? Read Answer
    • Vari - How much does it cost to change the ECU? Read Answer
    • Vari - How much does it cost to replace the ECU on a car? Read Answer
    • Vari - How much does it cost to replace the BCM ECU? Read Answer
    • Vari - How do you replace the xenon control unit of a Mercedes? Read Answer
    • Vari - What does the ffc fault code on the Iveco mean? Read Answer
    • Vari - Where is the Freemont oil pressure sensor located? Read Answer
    • Vari - What to do if the Camper's 12V power supply doesn't work? Read Answer
    • Vari - How much does it cost to replace the BSI ECU on a Peugeot? Read Answer
    • Vari - How much does it cost to reprogram the bsi? Read Answer
    • Vari - Where is the central locking control unit located? Read Answer
    • Vari - Where is the automatic transmission control unit located? Read Answer
    • Vari - What does IBC error mean? Read Answer
    • Vari - How much does the repair of the Opel Corsa ABS control unit cost? Read Answer
    • Vari - Where is the Fiat Grande Punto horn relay located? Read Answer
    • Vari - How to reset the control unit? Read Answer
    • Vari - How to program the engine control unit? Read Answer
    • Vari - What to do if the start & stop does not work? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos