Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
If the control unit (ECU) of your Geely Emgrand is giving you major operating problems then you must perform a manual reset to resolve any momentary software errors. To do this, there is no dedicated function on the on-board computer but we proceed "the old way". In fact, you must first turn off the car completely and then open the front hood to gain access to the engine compartment. Then locate the ECU on the right side, lower the safety hook and raise it completely. Wait a few seconds and install it again by closing the safety hook. At this point the restoration has taken place and you just have to test the operation by starting the car.
Posted on 27 April 2024 by ScegliAuto
Guide to the infotainment system of the Geely Emgrand.
(Various brands) Various In this guide today, we will go over the main instructions regarding the functions of the Geely Emgrand's infotainment system. First, let's get insid
Where is the fuse box on the 2013 Geely Emgrand
(Various brands) Various If you still haven't been able to locate the fuse box inside your Geely Emgrand 2013, don't worry because in the following mini guide you will find a
How to replace the air filter in the Geely Emgrand GT?
(Various brands) Various In this tutorial, we can see how to replace the cabin filter in the Geely Emgrand GT, a very simple and affordable operation. Let's start by going to Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |