Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Pad Warning Light on a Mini

Model: Mini Mini R56, R57, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

Video tutorial

If the brake pad wear warning light illuminates on the dashboard of your vehicle, after replacing the brake pads, you will need to reset the warning light. This guide provides simple instructions on how to perform the reset.

First, access the cabin and turn on the ignition. On the lower part of the dashboard, there is a button that you need to press and hold until the brake pad replacement indicator starts to flash and you are prompted to confirm the reset.

Release the button and press it again for one second to confirm the cancellation.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Reset the Brake Pad Wear Light on a Mini Cooper
How to Reset the Brake Pad Wear Light on a Mini Cooper
Mini (2001-2007 / R50, R52, R53) Follow these instructions to reset the brake pad wear light on your Mini Cooper. First, get inside the vehicle and keep the driver's door open; then …
How do you reset the brake wear indicator light on the Mini Cooper?
How do you reset the brake wear indicator light on the Mini Cooper?
Mini (2017-2023 / F60, Countryman2) In order to reset the brake wear indicator light of the Mini Cooper, you first need to replace the excessively worn brake pads by disconnecting the c…
Guide to Replacing the Brake Pad Wear Sensor on Mini Cooper
Guide to Replacing the Brake Pad Wear Sensor on Mini Cooper
Mini (2014-2023 / F56, F54, F57, F55) The steps in this guide will show you how to remove and replace the front brake pad wear sensor on the Mini Cooper. First, lift the vehicle and start…

How to Change the Time on the Peugeot 208

Today's guide will show you how to set the clock on the Peugeot 208's onboard computer, following the instructions below. First, get in the car and turn on the instrument panel; then press and hold the settings button on the panel for a few seconds until the time starts to flash, as shown in the video. At this point, press the left button to correctly set the time, adjusting the hour first and then the minutes; exit the onboard computer menu to save all the changes made!

Watch the video!


by ScegliAuto

More videos