Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Lower the Rear Seats of the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Seat

See other generations:
Video tutorial

This guide briefly outlines the steps to lower the rear seats of the BMW 3 Series, increasing the trunk space, following the instructions below. First, open the trunk lid and start pulling the levers located on both sides of the rear seatbacks; then lower the seats as shown in the video.

This will significantly increase the trunk's cargo volume; raise the seatbacks to return them to their original position by applying the reverse procedure!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Lower the Rear Seats of a BMW 3 Series
How to Lower the Rear Seats of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) On some BMW 3 Series models, the mechanism to lower the rear seats is not located at the top of the seatback, but in the trunk. Open the rear hatch a…
How to Fold the Rear Seats in a BMW 3 Series
How to Fold the Rear Seats in a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Hello everyone! Today, I will show you how to fold the rear seat backs in a BMW 3 Series E46. This is a really simple operation, yet many people don’…
How to Remove the Rear Seats in a BMW 3 Series?
How to Remove the Rear Seats in a BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) In this tutorial, you will see how to remove the rear seats in a BMW 3 Series, a very simple and quick operation. First, open both rear doors, then r…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos