Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Jack and Spare Wheel of the Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Wheel

See other generations:
Video tutorial

In the unfortunate event that one of the wheels of the Toyota Yaris is punctured, it is useful to know the location of the lifting jack, the spare wheel, the tool to operate the jack, and to unscrew the wheel bolts. The jack is located under the driver's seat, secured to a bracket and protected by a plastic cover, which you can remove by acting on the fixing clips.

The spare wheel is located under the floor panel of the boot, secured to the floor by a threaded plastic flange, alongside which you will find the tool, consisting of a bent bar, which is used to operate the jack on one side and to remove the wheel on the other.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

Where is the Spare Wheel Located in the 2018 Toyota Yaris?
Where is the Spare Wheel Located in the 2018 Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) Knowing where the spare wheel is stored in your car is essential for quick intervention in case a tyre punctures during your journey. DIY wheel repla…
How to Change a Wheel on the Toyota Yaris GR?
How to Change a Wheel on the Toyota Yaris GR?
Toyota Yaris (2020-2026 / MK 4) Changing a flat wheel on the Toyota Yaris GR is no different from performing the same operation on any other car. Proceed as you already know, and af…
Replacing the Engine Mount on a Toyota Yaris
Replacing the Engine Mount on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today's instructions show how to remove and replace the engine mount on a Toyota Yaris. First, raise the vehicle and start by removing the lower engi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos