Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin filter of the Ford Puma?

Model: Ford Puma MK 1 - Years 2019-2026
Part: Cabin air filter

In order to replace the cabin filter of the Ford Puma, you need to remove the small cover located on the left side of the front passenger footwell: once this is removed, you will need to loosen the screw underneath so that you can detach the corresponding panel. At this point, you will be able to locate the filter box underneath, which can be opened to remove the filter inside. The new one can then be inserted, covering everything with the box and reinserting the corresponding panel into its housing.

Posted on 10 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter in the Ford Puma DIY
How to replace the cabin filter in the Ford Puma DIY
Ford Puma (2019-2026 / MK 1) On the Ford Puma 1.0 Hybrid, the cabin filter can be accessed from the passenger side. With the vehicle stationary and the power off, open the glove …
How do you replace the cabin filter of the Ford Puma?
How do you replace the cabin filter of the Ford Puma?
Ford Puma (2019-2026 / MK 1) In order to replace the cabin filter of the Ford Puma, you need to loosen the screws that secure the panel located on the side of the passenger footw…
How do you reset the tire pressure warning light in the Ford Puma?
How do you reset the tire pressure warning light in the Ford Puma?
Ford Puma (2019-2026 / MK 1) The tire pressure in the Ford Puma can be checked and corrected using the kit provided. If any anomalies are detected in the tires, the dashboard war…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos