Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin filter of the Ford Puma?

Model: Ford Puma MK 1 - Years 2019-2026
Part: Cabin air filter

In order to replace the cabin filter of the Ford Puma, you need to loosen the screws that secure the panel located on the side of the passenger footwell (or on the driver's side for right-hand drive models). Once this panel has been completely removed, you can locate the cover of the filter box underneath: the screws holding the cover can be loosened to detach the cover and remove the filter inside. This can now be replaced with a new one and then cover everything with the panels that were just removed.

Posted on 15 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the cabin filter of the Ford Puma?
How do you replace the cabin filter of the Ford Puma?
Ford Puma (2019-2026 / MK 1) In order to replace the cabin filter of the Ford Puma, you need to remove the small cover located on the left side of the front passenger footwell: o…
How to replace the cabin filter in the Ford Puma DIY
How to replace the cabin filter in the Ford Puma DIY
Ford Puma (2019-2026 / MK 1) On the Ford Puma 1.0 Hybrid, the cabin filter can be accessed from the passenger side. With the vehicle stationary and the power off, open the glove …
How to Replace the Cabin Air Filter on a 2020 Ford Puma
How to Replace the Cabin Air Filter on a 2020 Ford Puma
Ford Puma (2019-2026 / MK 1) The air filter inside your 2020 Ford Puma is undoubtedly one of the most important components as it plays a central role in maintaining optimal air q…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos