Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Ford Puma DIY

Model: Ford Puma MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

On the Ford Puma 1.0 Hybrid, the cabin filter can be accessed from the passenger side. With the vehicle stationary and the power off, open the glove compartment and unclip it as shown to access the panel behind the dashboard.

Remove the cover of the filter compartment by pressing the retaining tabs, then extract the used filter, paying attention to the orientation of the airflow. Insert the replacement filter following the "Air Flow" arrow printed on the frame and close the cover until it clicks into place.

Reassemble the glove compartment and check the proper functioning of the ventilation system.


Posted on 14 December 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on the Ford Puma
How to Replace the Cabin Filter on the Ford Puma
Ford Puma (2019-2026 / MK 1) To replace the cabin filter on the Ford Puma, detach the small cover located on the left side of the front passenger footwell: once this is removed, …
How do you replace the cabin filter of the Ford Puma?
How do you replace the cabin filter of the Ford Puma?
Ford Puma (2019-2026 / MK 1) In order to replace the cabin filter of the Ford Puma, you need to loosen the screws that secure the panel located on the side of the passenger footw…
How to replace the air filter of the Ford Puma
How to replace the air filter of the Ford Puma
Ford Puma (2019-2026 / MK 1) Today we will explain how to replace the air filter on a Ford Puma car. Replacing the air filter is one of those operations that is part of the servi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos