Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on the Peugeot Partner

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Shift knob

See other generations:
Video tutorial

Replacing the gear knob on a Peugeot Partner is a straightforward task you can do yourself. To carry out this operation, remove the lower part of the dashboard and lift the gear gaiter.

Then, with the gear lever in neutral, rotate the knob until it comes off. Remove the gaiter as well and proceed with the replacement by inserting the rubber base of the gear knob into the gaiter, then fit the entire assembly back into the gear lever.

Secure the gaiter to the dashboard and push the central knob back into the gear lever.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob in the Peugeot Partner?
How to Replace the Gear Knob in the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) The method used to replace the gear knob of the Peugeot Partner, as shown in the video, is very simple and accessible to everyone. The task involves …
Is it possible to replace the gear knob on a Peugeot Partner?
Is it possible to replace the gear knob on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) What you will see in this video is applicable to any type of vehicle, as the technique remains the same. If you decide to replace the gear knob becau…
How to Remove the Gear Knob of a Peugeot Partner
How to Remove the Gear Knob of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Does removing the gear knob of a Peugeot Partner seem difficult? Follow these steps. Use a plastic lever to detach the leather gaiter frame; grasp th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos