Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulb of a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part:

See other generations:
Video tutorial

Today, we'll explain how to independently replace the third brake light bulb of a Peugeot Partner Tepee. Start by opening the left rear door and proceed to remove the two screws located near the light.

Continue by pushing the screws inward to release the light. Once the light is removed, disconnect the connector from the bulb and replace it. Reconnect the connector and position the light back in its housing.

Finish by tightening the two screws. The same steps can be followed for replacing the third brake light on a Citroen Berlingo.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Peugeot Partner
How to Replace the Radio in a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) This video shows how to remove the radio from a Peugeot Partner to replace it with a more modern unit. Removing the device from its housing is easy: …
How to replace the headlight bulb of the Peugeot Partner.
How to replace the headlight bulb of the Peugeot Partner.
Peugeot Partner Tepee (2008-2018 / B9) Today we will explain how to replace the headlight bulb of the Peugeot Partner. To carry out the replacement, it is necessary to remove the water pum…
How to Replace the Rear Light Bulb on a Peugeot Partner?
How to Replace the Rear Light Bulb on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the rear light bulb on a Peugeot Partner, open the tailgate. Unscrew the screws that secure the light unit within its housing and disconne…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos