Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

This video shows how to remove the radio from a Peugeot Partner to replace it with a more modern unit. Removing the device from its housing is easy: simply press small screwdrivers into the four holes on the sides of the front panel to release it and pull it towards you. Disconnect the electrical connectors, and if you want to install a reversing camera, you will also need to remove the third brake light and expose the wires inside the rear door.

Now take the new unit you have chosen, install the reversing camera above the third brake light, routing the cable through the channel, under the doors, and to the reverse light, then to the radio screen, which you will fit in place of the old unit, connecting all the plugs.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to Remove the Stereo from a Peugeot Partner Without Tools
How to Remove the Stereo from a Peugeot Partner Without Tools
Peugeot Partner Tepee (2008-2018 / B9) To replace the radio in your Peugeot Partner, perhaps to install a 2 DIN model with a screen and Android applications, or to carry out any operation,…
How to Remove the Radio from a Peugeot Partner
How to Remove the Radio from a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Remove the radio from a Peugeot Partner? It's quite simple. Let's see how to do it. Insert the keys into the holes on the plastic trim of the stereo,…
How to Reset the Tyre Pressure Light on Peugeot Partner
How to Reset the Tyre Pressure Light on Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) In this short video tutorial, you can see how to reset the tyre pressure light on a second-generation Peugeot Partner. Before performing this simple …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos