Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stereo from a Peugeot Partner Without Tools

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

To replace the radio in your Peugeot Partner, perhaps to install a 2 DIN model with a screen and Android applications, or to carry out any operation, such as installing a reversing camera, you must first remove the old stereo. You can do this easily, without any tools.

You will only need four small screws (the YouTuber even used three, replacing one with a cotton bud) to leverage the attachment points. At this point, the radio will slide out, and you can easily disconnect the rear plugs that connect the radio to the electrical system and the antenna.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Peugeot Partner
How to Remove the Radio from a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Remove the radio from a Peugeot Partner? It's quite simple. Let's see how to do it. Insert the keys into the holes on the plastic trim of the stereo,…
How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …
How to Remove the Original Radio from a Peugeot Partner
How to Remove the Original Radio from a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) How to remove the original radio from a Peugeot Partner? Follow these guidelines carefully. Use the original or aftermarket metal keys to remove the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos