Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Peugeot 206: a water leak inside the car due to the antenna

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Antenna

Video tutorial

In this video, the YouTuber notices a water leak inside the car. Rainwater enters from the base of the antenna on the roof, causing dampness in the upholstery, wet interiors, or drops near the interior light. For the repair, which can be done easily by yourself: remove the antenna from the roof, then inspect the rubber seal at the base; reseal the base with an appropriate sealant (e.g., body silicone) and finally reinstall the antenna.

For this job, you only need basic tools: a spanner, screwdriver, and sealant (like Pattex polymer sealant, which can be found on Amazon with code B07K96XVTT at a price of £8.70, with free shipping for Prime customers). This way, you stop the water leak and protect the interior of the car from damage.


Posted on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Antenna on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the antenna on a Peugeot 206, use a tool to pry off the interior light housing. Once removed, disconnect the bulb connectors to access the…
How to Remove and Replace the Antenna on a Peugeot 206
How to Remove and Replace the Antenna on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, learn how to replace the antenna on a Peugeot 206: use a plastic spatula to pry off the internal light unit of the vehicle, disconnect…
How to Replace the Antenna with Base on a Peugeot 206
How to Replace the Antenna with Base on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to replace the radio reception antenna on a Peugeot 206? Let's see how to remove the antenna from the roof. Lever between the interior light and …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos