Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna with Base on a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Antenna

Video tutorial

How to replace the radio reception antenna on a Peugeot 206? Let's see how to remove the antenna from the roof. Lever between the interior light and the headlining panel (without damaging the headlining), pull the interior light out of the panel and disconnect the power connector.

Unscrew the fastening bolt of the antenna base (located between the metal and the base), detach the interior light. Fit the new base on the roof of the car (screw the bolt with the screwdriver until fully tightened).

Test the antenna's correct operation. Finally, reattach the interior light.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Antenna on a Peugeot 206
How to Remove and Replace the Antenna on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, learn how to replace the antenna on a Peugeot 206: use a plastic spatula to pry off the internal light unit of the vehicle, disconnect…
How to Replace the Antenna on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the antenna on a Peugeot 206, use a tool to pry off the interior light housing. Once removed, disconnect the bulb connectors to access the…
Peugeot 206: a water leak inside the car due to the antenna
Peugeot 206: a water leak inside the car due to the antenna
Peugeot 206 (1998-2012 / MK 1) In this video, the YouTuber notices a water leak inside the car. Rainwater enters from the base of the antenna on the roof, causing dampness in the u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos