Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Peugeot Partner Tepee - Car stereo

Peugeot Partner Tepee (2008-2018 / B9)
How to remove the stereo from Peugeot Partner without tools
If we want to replace the radio of our Peugeot Partner, perhaps to install a 2 DIN model with a screen and Android applications, or to carry out any type of …read all…
Posted on 1 June 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Remove car stereo on Partner
Remove the car radio on a Peugeot partner? Let's see how it disassembles. We insert the keys in the holes on the plastic cover of the stereo, pull the stereo …read all…
Posted on 18 December 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to remove car stereo on Peugeot Partner
Remove the car radio on a Peugeot partner? Nothing easier. Let's see how it disassembles. We insert the keys in the holes on the plastic cover of the stereo, …read all…
Posted on 18 December 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to remove the original car stereo of a Peugeot Partner
How to remove the original car stereo of a Peugeot Partner? Let's see carefully how to carry out the disassembly following the guidelines. We use the original …read all…
Posted on 17 November 2023 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Glow plugs (1) Key (4) Timing belt (7) -board computer (2) Checks and maintenance (37) Dashboard (1) Tail light (1) Particulate filter (2) Air filter (4) Cabin air filter (4) Diesel filter (5) Clutch (1) Light bulb (4) Headlight bulb (2) Rear light bulb (5) License plate light (3) Engine (6) Starter motor (1) Gear oil (2) Engine oil (3) Door panel (7) Brake pads (2) Hydraulic pistons (1) Tires (4) Gear Shift Knob (2) Pump (1) Push button (1) Instrument cluster (11) Radiator (1) Fuse box (13) Seat (2) Coolant temperature sensor (1) Outside rearview mirror (1) Engine mount (1) Thermostat (2) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos