Do it yourself
Frequently asked questions about cars and motorcycles

Peugeot Partner Tepee - Airbag

Airbag Peugeot Partner Tepee (2008-2018 / b 9)

Peugeot Partner Tepee (2008-2018 / B9)
How to Replace the Passenger Airbag in a Peugeot Partner

Learn how to replace the passenger airbag in a Peugeot Partner (also applicable to the Citroen Berlingo), located on the dashboard above the passenger glove …Read all…
Posted on 27 August 2026 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to Remove the Steering Wheel Airbag from the Peugeot Partner

To remove the steering wheel airbag from the Peugeot Partner, you need to get inside the vehicle and rotate the steering wheel to a horizontal position. Insert …Read all…
Posted on 3 February 2026 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
Where is the airbag module of the Peugeot Partner Tepee located?

Disconnecting the airbag module of a vehicle means disabling the system altogether. This operation is usually carried out when we need to remove the steering …Read all…
Posted on 8 August 2024 by ScegliAuto

Airbag (3) Alternator (2) Shocks (1) Car stereo (7) Battery (13) Transmission (4) Glow plugs (2) Body (1) Control unit (3) Key (7) Timing belt (8) Onboard computer (3) Checks and maintenance (19) Dashboard (5) Shifter boot (1) Headlight (3) Tail light (4) Diesel particulate filter (3) Air filter (7) Cabin air filter (9) Diesel fuel filter (9) Clutch (3) Accessory kit (1) Light bulb (7) Headlight bulb (10) Tail light bulb (6) License plate light (4) (1) Handle (1) Engine (6) Starter motor (1) Transmission fluid (3) Engine oil (4) Clock (22) Door trim panel (11) Windshield (1) Brake pads (2) Hydraulic pistons (1) Shift knob (6) Pump (2) Car door (4) Push button (1) Instrument cluster (2) Radiator (2) Heater core (2) Fuse box (33) Seat (2) Engine coolant temperature sensor (1) Side mirror (6) AdBlue warning light (9) Warning light – error code (11) (26) Tire pressure warning light (7) Service warning light (68) Engine mount (1) Thermostat (3) Turbocharger (1) Blower motor (1) Steering wheel (1)

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos