Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : Rear light bulb

Peugeot Partner Tepee - Rear light bulb

Peugeot Partner Tepee (2008-2018 / B9)
How do you replace the rear headlight bulb of the Peugeot Partner?
The replacement of the rear headlight bulb of the Peugeot Partner is done by opening the rear tailgate of the vehicle, so that it is possible to access the …read all…
Posted on 10 May 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How do you replace the rear light bulb on your Peugeot Partner?
To be able to replace the rear light bulb on your Peugeot Partner you have to go and open the tailgate, you will need to unscrew the screws that hold the …read all…
Posted on 13 May 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to replace the rear light bulbs in Peugeot Partner?
As we can see in this tutorial, changing the rear light bulbs on your Peugeot Partner is an extremely simple and fast operation. Before proceeding, let's make …read all…
Posted on 16 November 2022 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to change the rear light bulbs of the Peugeot Partner Tepee
We see below the main instructions that will allow us to remove and replace the rear light bulbs of the Peugeot Partner Tepee. First of all, let's move to the …read all…
Posted on 26 May 2022 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to remove the rear light bulb of a Peugeot Partner
Before we can start, we will have to go to open and unhook the rear doors of the load compartment of our Peugeot Partner. So let's start by unscrewing and …read all…
Posted on 25 January 2024 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Glow plugs (1) Key (4) Timing belt (7) -board computer (2) Checks and maintenance (37) Dashboard (1) Tail light (1) Particulate filter (2) Air filter (4) Cabin air filter (4) Diesel filter (5) Clutch (1) Light bulb (4) Headlight bulb (2) Rear light bulb (5) License plate light (3) Engine (6) Starter motor (1) Gear oil (2) Engine oil (3) Door panel (7) Brake pads (2) Hydraulic pistons (1) Tires (4) Gear Shift Knob (2) Pump (1) Push button (1) Instrument cluster (11) Radiator (1) Fuse box (13) Seat (2) Coolant temperature sensor (1) Outside rearview mirror (1) Engine mount (1) Thermostat (2) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos