Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs in a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Tail light bulb

As shown in this tutorial, replacing the rear light bulbs in a Peugeot Partner is an extremely simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by opening the boot lid, then using a T20 Torx screwdriver, unscrew the two fixing bolts located on the inner edge of the headlight in question. Next, grasp the headlight, pull it outwards, and separate it from the bodywork. At this point, disconnect the power connector, unclip the rear plate, and proceed to replace the faulty bulb.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee
How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Follow these main instructions to remove and replace the rear headlamp bulbs on the Peugeot Partner Tepee. First, move to the rear of the vehicle and…
How to replace the rear headlight bulb of the Peugeot Partner
How to replace the rear headlight bulb of the Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) Replacing the rear headlight bulbs of the Peugeot Partner is a simple and quick operation to be carried out independently. First, we open the trunk o…
How to Replace the Headlight Bulbs on the Peugeot Partner Van?
How to Replace the Headlight Bulbs on the Peugeot Partner Van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, you will see how to replace the headlight bulbs on the Peugeot Partner van, a very simple and quick operation. First, ensure that t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos