Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Shell of the Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

The instructions in this guide will illustrate the procedure for disassembling and replacing the key shell and all its components for the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, take your remote control and start by unscrewing the small screw on the cover; pry on the sides to open the remote into two parts, accessing the circuit board, battery, transponder, and key components.

Now transfer and reassemble all the components in order, finally checking the correct functioning of the remote!


Posted on 28 May 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower ar…
How to Program the Key for the Peugeot Partner Tepee
How to Program the Key for the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Follow the steps to program the key for the Peugeot Partner Tepee using a diagnostic tool. First, get in the vehicle and insert the key into the igni…
Removing the Diesel Particulate Filter from the Peugeot Partner Tepee
Removing the Diesel Particulate Filter from the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) This guide will show you how to remove and replace the diesel particulate filter (DPF) of the Peugeot Partner Tepee HDI, following the instructions b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos