Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Peugeot Partner Tepee - Key

Peugeot Partner Tepee (1996-2013 / MK 1)
How do you replace the battery of the Peugeot Partner remote control?
In order to replace the battery of the Peugeot Partner remote control, you need to loosen the screw located at the back of the device, just below the base of …read all…
Posted on 9 August 2023 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to replace the key battery of a Peugeot Partner
Let's start by pressing the upper silver button, thus opening the physical key of our Peugeot Partner. We proceed by inserting the tip of a small slotted …read all…
Posted on 3 January 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to replace the battery in the key of a Peugeot Partner?
Let's start by pressing the silver button at the top of the key, thus opening the physical key of our Peugeot Partner. Subsequently, we will have to go to …read all…
Posted on 3 January 2024 by ScegliAuto
Peugeot Partner Tepee (2008-2018 / B9)
How to replace the key battery of a Peugeot Partner
How to replace the battery in the remote control key of a Peugeot Partner? Let's see in this video how to proceed. We take our remote control and we go with …read all…
Posted on 22 November 2023 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Glow plugs (1) Key (4) Timing belt (7) -board computer (2) Checks and maintenance (37) Dashboard (1) Tail light (1) Particulate filter (2) Air filter (4) Cabin air filter (4) Diesel filter (5) Clutch (1) Light bulb (4) Headlight bulb (2) Rear light bulb (5) License plate light (3) Engine (6) Starter motor (1) Gear oil (2) Engine oil (3) Door panel (7) Brake pads (2) Hydraulic pistons (1) Tires (4) Gear Shift Knob (2) Pump (1) Push button (1) Instrument cluster (11) Radiator (1) Fuse box (13) Seat (2) Coolant temperature sensor (1) Outside rearview mirror (1) Engine mount (1) Thermostat (2) Turbine (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos