Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key for the Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

Follow the steps to program the key for the Peugeot Partner Tepee using a diagnostic tool. First, get in the vehicle and insert the key into the ignition barrel; then connect your software and select the make, model, and engine type, as shown in the video.

At this point, follow the guided procedure for programming and coding the new key, having the second already programmed key on hand; then check its functionality by following the video tutorial to the end!


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower ar…
Replacing the Key Shell of the Peugeot Partner Tepee
Replacing the Key Shell of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) The instructions in this guide will illustrate the procedure for disassembling and replacing the key shell and all its components for the Peugeot Par…
How to Replace the Battery in the Peugeot Partner Tepee
How to Replace the Battery in the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Today, discover the instructions that will allow you to remove and replace the battery in the Peugeot Partner Tepee, as well as the Citroen Berlingo.…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos