Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Peugeot Partner 3 remote control

Model: Peugeot Partner Tepee MK 3 - Years 2018-2026
Part: Key

If you want to replace the battery inside the remote control of your Peugeot Partner Mk3, all you need to do is carefully read the following guide and then apply the various steps described. First of all, get a new CR2032 battery and then take the vehicle's remote control and remove the protective cover with the help of a small flat-head screwdriver. Immediately after removing the cover in question, remove the old battery and replace it with the new one. Finally, reassemble the cover and the procedure is successfully completed.

Posted on 15 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Peugeot Partner
How to Replace the Key Battery of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) How do you replace the battery in the remote key of a Peugeot Partner? Let's see how to proceed in this guide. Take your remote and use a lever to se…
Replacing the Key Shell of the Peugeot Partner Tepee
Replacing the Key Shell of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) The instructions in this guide will illustrate the procedure for disassembling and replacing the key shell and all its components for the Peugeot Par…
How to replace the remote battery of the Peugeot Partner?
How to replace the remote battery of the Peugeot Partner?
Peugeot Partner Tepee (1996-2013 / MK 1) To replace the remote battery of the Peugeot Partner, loosen the screw located on the back of the device, just below the base of the key: once this s…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos