Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the 12V Battery of the Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Battery

These simple steps will allow you to remove and replace the 12V battery of the Peugeot Partner Tepee. First, open the bonnet of the vehicle and disconnect both battery terminals (positive and negative); then, undo the screw of the battery bracket located underneath, removing it from its compartment, as shown in the video. At this point, install the new battery (with the same amperage), inserting it the correct way; connect the electrical terminals and check for proper ignition, finally lowering the bonnet!

Posted on 23 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Peugeot Partner Tepee
How to Replace the Battery on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this video tutorial, learn how to replace the battery on a Peugeot Partner Tepee. Start by opening the bonnet and immediately disconnect the negat…
How to replace the battery of the Peugeot Partner Tepee
How to replace the battery of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Today we discover the instructions that will allow us to disassemble and replace the battery of the Peugeot Partner Tepee, but also of the Citroen Be…
Replacement of the thermostat for the Peugeot Partner Tepee 1.6 HDi
Replacement of the thermostat for the Peugeot Partner Tepee 1.6 HDi
Peugeot Partner Tepee (1996-2013 / MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the thermostat of the engine cooling circuit of the Peugeot…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos