Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the clutch cable of the Peugeot Partner Tepee - Citroen Berlingo

Model: Peugeot Partner Tepee B9 - Years 2008-2018

Today's instructions will show us the process of disassembling and replacing the clutch cable of the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, we open the hood of the car and begin to disassemble and remove the battery, disconnecting both terminals (positive and negative); then we unscrew the battery holder screws to remove it, accessing the clutch cable. At this point, we disconnect the cable from the register and also disconnect it from the pedal, removing it and replacing it with the new one along with the sheath, following the video tutorial until the end!

Posted on 9 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch Cable on the Peugeot Partner Tepee 2.0 HDI
Replacing the Clutch Cable on the Peugeot Partner Tepee 2.0 HDI
Peugeot Partner Tepee (1996-2013 / MK 1) This guide shows you the main steps to remove and replace the clutch cable on the Peugeot Partner Tepee 2.0 HDI. First, raise the vehicle and disconn…
How to Reset the FAP Fluid Warning Light on a Peugeot Partner Tepee - Citroen Berlingo
How to Reset the FAP Fluid Warning Light on a Peugeot Partner Tepee - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) .. light on a Peugeot Partner Tepee, as well as on a Citroen Berlingo (applicable to Euro 5 PSA group engines). First, get into the vehicle and connect your.. …
Replacing the Key Shell of the Peugeot Partner Tepee
Replacing the Key Shell of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) .. for the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, take your remote control and start by unscrewing the small screw on the cover;.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the horn relay located on the Peugeot Partner? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos