Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the clutch cable of the Peugeot Partner?

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013
Part: Clutch

In order to replace the clutch cable of the Peugeot Partner, you need to access the components inside the engine compartment: here you can start by removing the panel behind the pedals, in order to locate the first end of the cable. This end should be disconnected and then the one inside the engine compartment should also be disconnected: this other end will be located between the gearbox and the engine block. Once removed, you can install the new clutch cable and make sure everything is functioning properly.

Posted on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Partner Tepee (2008-2018 / B9) To replace the clutch cable on a Peugeot Partner, open the bonnet to access the components located inside the engine bay: at its lower part, you will…
Peugeot Partner Tepee (1996-2013 / MK 1) This guide shows you the main steps to remove and replace the clutch cable on the Peugeot Partner Tepee 2.0 HDI. First, raise the vehicle and disconn…
Peugeot Partner Tepee (2008-2018 / B9) Today's instructions will show us the process of disassembling and replacing the clutch cable of the Peugeot Partner Tepee, as well as the Citroen Be…

Other guides you may be interested in

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - How much does it cost to replace the Peugeot Partner clutch? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos