Do it yourself
Frequently asked questions about cars and motorcycles

How do you install the clutch cable in the Peugeot Partner?

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013
Part: Clutch

Having difficulty shifting gears in any vehicle is often a sign of a worn clutch or a similarly worn cable that is close to breaking. Speaking of the latter, referring to the car mentioned above, let's see how it should be replaced: After removing the old cable, start from the engine compartment, first mounting one end to the clutch assembly, then passing the other end through the appropriate hole, securing it firmly in the rubber grommet and attaching it to the clutch pedal lever. Adjusting it is done after repeatedly pressing the aforementioned pedal.

Posted on 5 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Partner Tepee (1996-2013 / MK 1) This guide shows you the main steps to remove and replace the clutch cable on the Peugeot Partner Tepee 2.0 HDI. First, raise the vehicle and disconn…
Peugeot Partner Tepee (2008-2018 / B9) To replace the clutch cable on a Peugeot Partner, open the bonnet to access the components located inside the engine bay: at its lower part, you will…
Peugeot Partner Tepee (2008-2018 / B9) Today's instructions will show us the process of disassembling and replacing the clutch cable of the Peugeot Partner Tepee, as well as the Citroen Be…

Other guides you may be interested in

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - How much does it cost to replace the Peugeot Partner clutch? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos