Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Clutch Cable on a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Clutch

Let's see how to change the clutch cable on a Peugeot Partner: you can find an adjustable cable for this vehicle on auto-doc. The EAN code is 5703858635053 at a price of £20.49 plus £9.95 for shipping. Access the clutch pedal located under the dashboard. You need to remove the pedal assembly (or at least some components to access the cable). In the video, they had to remove a through pin and another bolt behind the pedal assembly. The cable is secured to the pedal by a clip, which you will need to unclip. Following the path of the cable, you will reach the engine compartment, where the cable connects to the clutch fork on the gearbox. Disconnect the old cable from the fork. The new cable is adjustable and has a nut to adjust the tension: insert it following the same path as the old one, pass it through the hole in the bulkhead, from the engine compartment into the cabin, and bring it to the pedal. Reposition the clip that secures the cable to the pedal, and reassemble the pedal assembly. Under the vehicle, attach the cable to the fork, then use the nuts on the adjustable cable to set the correct tension for the clutch.

Posted on 23 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch Cable on the Peugeot Partner Tepee 2.0 HDI
Replacing the Clutch Cable on the Peugeot Partner Tepee 2.0 HDI
Peugeot Partner Tepee (1996-2013 / MK 1) This guide shows you the main steps to remove and replace the clutch cable on the Peugeot Partner Tepee 2.0 HDI. First, raise the vehicle and disconn…
How to Replace the Clutch Cable on a Peugeot Partner?
How to Replace the Clutch Cable on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the clutch cable on a Peugeot Partner, open the bonnet to access the components located inside the engine bay: at its lower part, you will…
Guide to replacing the clutch cable of the Peugeot Partner Tepee - Citroen Berlingo
Guide to replacing the clutch cable of the Peugeot Partner Tepee - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) Today's instructions will show us the process of disassembling and replacing the clutch cable of the Peugeot Partner Tepee, as well as the Citroen Be…

Other guides you may be interested in

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - How much does it cost to replace the Peugeot Partner clutch? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos